rodos pisze:Co najśmieszniejsze wewnętrzny BEC działa bez problemu.
rodos pisze:No właśnie tak się zastanawiam czy obecnie w ogóle warto stosować zewnętrznego BECA....
Też mam podejrzenia, że BEC jest zwalony, czy jest dobry test żeby to definitywnie stwierdzić ?
wraz z detalami na http://www.helifreak.com/showthread.php?t=279713&page=2 oraz http://www.archeli.com.au/forums/showth ... p?t=136223Wizza pisze:Ok. I'll try and explain this better. Look at a JR/Spektrum Satellite receiver. You will see two little wires, one poking out each side of the satellite receiver. Only ONE of these wires is an ANTENNA. The other wire is called a ground plane/element and it is NOT an active antenna. The radio signal from your transmitter is received on the left-hand wire/antenna of the satellite - the active antenna.
Therefore, you need to very carefully think about how you position and orientate your satellite receivers so that they receive optimum signal.
The short of it - the little wire on the left-hand-side is an ANTENNA. You need to position your satellite so that this antenna (LHS) is pointing out in free air and not against carbon or aluminium....
The little wire on the right-hand-side is NOT an active antenna - it is a ground, and does not actively receive the radio signal.
gwoli ścisłości to nie "masa" tylko "przeciwwaga" - tą samą funkcję w CB spełnia buda auta dlatego nie jest bez znaczenia jak i gdzie jest mocowana antena do karoserii...It's called "ground"
Rearranging the formula gives us:
Wavelength = V/F therefore 2.998 E8 divided by 2.44 E9
This gives us 122.869 E-3 or 122.869mm for a FULL wavelength.
Note that our common RC antenna for 2.4GHz is actually a ¼ wavelength type so we need to divide by 4 for the final answer which gives us 30.7mm – Simple!
Użytkownicy przeglądający to forum: Obecnie na forum nie ma żadnego zarejestrowanego użytkownika i 1 gość